Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

  1. #1
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    These supplies are the ones Mark, Al and John are using for their Mighty Mini Spot projects. One supply along with a 16 channel DC controller will handle 4 Mighty Mini spots. The price is $14.95 each and the next discount point is 48 units. So that's going to be our lowest cost for the supply (a very good price !). But we can still save a few $$ shipping.

    Let me know how many you want. I will cover the cost until I hand you your order.

    I will close this buy next Tuesday March 23rd. So there's a good chance these will arrive before the Welding Workshop on April 3rd, (in case you will also be there) ..

    Here's a link:

    http://www.mpja.com/prodinfo.asp?number=16854+PS
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

  2. #2
    Professional Net Lurker Jack Stevens's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Pittsboro, NC
    Posts
    1,496
    Thanks (Received)
    6
    Likes (Received)
    78
    Mentioned
    38
    Tagged
    0 Thread(s)
    Quoted
    115

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Put me down for 2 units.

    Thanks!

  3. #3
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Gotcha Jack. We can meet at the marina at Jordan Lake when you supplies come in. We've got a houseboat there.

    Here's the list so far:

    Cole - 1
    Stevens - 2
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

  4. #4
    Professional Net Lurker Jack Stevens's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Pittsboro, NC
    Posts
    1,496
    Thanks (Received)
    6
    Likes (Received)
    78
    Mentioned
    38
    Tagged
    0 Thread(s)
    Quoted
    115

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Denny -

    If they come in by the welding workshop, we can do it then.

  5. #5
    This space for rent. Al in Raleigh's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Raleigh, NC
    Posts
    3,531
    Thanks (Received)
    0
    Likes (Received)
    174
    Mentioned
    36
    Tagged
    0 Thread(s)
    Quoted
    73

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Denny did Walter order a couple supplies? I emailed him and he said he wanted to order. His job has been keeping him busy lately. He has your enclosures too. The 1500s are a couple inches wider and thicker than the LOR PC controllers. The SSR4 enclosures are really small.

  6. #6
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    I will make sure I speak with Walter before I order .. I will also see if I can meet him for my case, etc. Willtry to get the supplies by the Welding Workshop !
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

  7. #7
    The Christmas Nutt walter's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Swepsonville, NC
    Posts
    347
    Thanks (Received)
    0
    Likes (Received)
    15
    Mentioned
    18
    Tagged
    0 Thread(s)
    Quoted
    12

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    put me down for one please
    Walter


  8. #8
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Just about ready to order. Last call ! Send me your order tonight if you want to get in on these power supplies.

    Here's the list:

    Denny - 1
    Jack - 2
    Walter - 1
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

  9. #9
    This space for rent. Al in Raleigh's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Raleigh, NC
    Posts
    3,531
    Thanks (Received)
    0
    Likes (Received)
    174
    Mentioned
    36
    Tagged
    0 Thread(s)
    Quoted
    73

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Jack now is your chance.

  10. #10
    Registered User mschell's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Lexington, NC
    Posts
    1,165
    Thanks (Received)
    0
    Likes (Received)
    40
    Mentioned
    24
    Tagged
    0 Thread(s)
    Quoted
    79

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Denny,
    Put me down for 2.
    Mark

    New location - new display. Looking forward to 2015 season!

  11. #11
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    ORDER PLACED

    Denny - 1
    Jack - 2
    Mark - 2
    Walter - 1

    Cost including shipping is $17 each. I will report back with the arrival date, once I get the UPS shipping tracking.
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

  12. #12
    Professional Net Lurker Jack Stevens's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Pittsboro, NC
    Posts
    1,496
    Thanks (Received)
    6
    Likes (Received)
    78
    Mentioned
    38
    Tagged
    0 Thread(s)
    Quoted
    115

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    Quote Originally Posted by Al in Raleigh View Post
    Jack now is your chance.
    Huh? My chance for what? I was already participating.

  13. #13
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    I received an email today that these parts have been shipped. The UPS tracking number was also given. It does not have the predicted arrival yet, but that should be there by tomorrow. This looks like a VERY good chance that these will arrive by the welding workshop next Saturday (April 3rd).
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

  14. #14
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    UPS is awesome. The Power Supplies are already in Raleigh ! The tracking number shows delivery on Monday but sometimes they also deliver on the weekends. I will have the supplies at the Welding Workshop !
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

  15. #15
    xLights or BUST in 2018 kidcole's Avatar
    Status
    Offline
    Join Date
    Jun 2009
    Location
    Clayton, NC
    Posts
    3,945
    Thanks (Received)
    43
    Likes (Received)
    233
    Blog Entries
    2
    Mentioned
    75
    Tagged
    0 Thread(s)
    Quoted
    396

    Default Re: 24V DC Power Supply (6.5a) for Mighty Mini spots (or other projects)

    I have the power supplies and I will bring them to the welding workshop Saturday.

    Denny - Paid
    Jack - $34
    Mark - $34
    Walter - Paid

    Jack/Mark, if both of you are not at the workshop then I will make arrangements to get the supplies to you.
    Thanks,

    Denny Cole
    https://www.facebook.com/groups/Cole...ristmasLights/

    I Went Static in 2017. FINALLY Moving to Xlights for 2018 !

    Falcon - 3 F16V3 & 1 PiCap, Sandevices - 2 E681 & 4 E6804, 288 Channels Lynx Express, 108 Channels DC DMX,
    10' Pixel MegaTree, CoroFlakes w/Pixel Modules, Pixel RBLs, 2 Pixel Matrix 16x25, 10" RGB Ornaments, 7x230 Pixel Icicle Matrix,
    Classic 20' AC Megatree, TIR Destiny RGB Spots, RGB Blowmolds, Wireframes, and Inflatables with External Light Control

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •